Home
Products
Order
FAQ
Support
Resources
Contact Us
About Us
Blog
 
 
Hi-Pot/Ground Continuity Tester
0-2500 VAC Dielectric and Ground Continuity Tester for Corded Products 
 
Model 565
The Lowest Priced TUV Certified Tester for UL and CSA Compliance
 
 
Hi-pot (hi pot, hipot or flash) testers and dielectric strength testers are typically used to perform electrical safety testing on components and products to insure that they comply with the safety requirements of UL, CSA, TUV and other  standard certifying bodies.
The Model 565, designed for corded products, combines both Ground Continuity and Hi-Pot tests into one single tester. 
 
This tester performs the same functions as models sold by other companies but at a much lower price and without all the complex features that confuse production employees.   

PRICE:   $710.00

 
An Easy to Use Product at a Practical Price!

 

Designed for Corded Products
The panel mounted receptacle allows corded product's ground continuity and dielectric strength to be verified.
 
Ground Continuity Verification
The product's ground continuity can be verified with a push of a button.
 
Adjustable Output Voltage
The output voltage is adjustable from 0 to 2,500 VAC (or 3,000 VAC with option 40570), as displayed on a direct reading kilovolt meter.
 
Automatic Shut Down
Excessive leakage, dielectric flash over or failure of the product's ground continuity causes automatic shutdown of the output test voltage.
 
Visual and Audible Alarms
Both visual and audible alarms alert the operator of an out of tolerance condition. The tester must be reset by cycling the power switch off and on again.
 
Fast Response
The tester uses a fast response detection circuit to detect even short duration arcs or breakdowns that might occur. Once a fault is detected, the test circuit opens within milliseconds.
 
Meets UL's 120K Ohm Test
The UL 120K Ohm test requirement can be verified by using the functional test plug included.
 
Built, Sold and Serviced in the U.S.
For over four decades Sotcher Measurement, Inc. has provided latest state-of-the-art electrical test equipment that is easy to use and maintain. Our customers rely on our products to verify the safety of the electrical devices they rent, use or manufacture. We feel this commitment very deeply. In response, we do our utmost to insure that the products we offer are of the highest quality and performance, consistent with good value.
 
We continue to design, manufacture and service all of our products in the United States. We are proud to be able to offer our customers fine American products that are easy to use at a practical price.
 
 
 
 
Input Voltage:           
120VAC, 60Hz, 120VA Max
Output Voltage:   
0-2,500VAC
Dielectric Trip Limit:     
5.0 mA, +/-5%
Transformer Rating:     
50 VA
Meter Accuracy:     
+/-3%
Dimensions:               
5-1/5 inches high, 9 inches wide, 8 inches deep
Weight:                           
Approximately 12 pounds
   
 
40002  N.I.S.T Traceable Certification with Data
$115.00
40563  230V, 50Hz Input
$153.00
40566  Digital Dielectric Kilovolt Meter
$258.00
40570  0-3,000 VAC Output
$120.00
 
 

 
Model 565 Hi-Pot/Ground Continuity Tester
• UL 120K Ohm Functional Test Plug
• User's Manual
• Test Clip
• One Year Parts and Labor Warranty
 

 
 
 
 
 
 

 

 
"All of the products that I have purchased from Sotcher Measurement have worked 100%"
John Soxman
Soxman Rent All Inc. 
 
 

 

Navigation

Nationally Recognized Sotcher Measurement Inc. test equipment is in common use throughout the United States by major manufactures of power tools and appliances.