Contact Us
About Us
Power Cord Test Station
High Speed Testing of Power Supply Cords
Model 480
Model 480
Production Testing and Compliance of Extension Cords, Drop Lights, Spider Cords and Power Supply Cords
This tester is loaded with features that are assured to help your speed your production testing. Meets all testing specifications of UL, CSA, TUV, VDE and JIS.
Short adapter cords can be used for any configuration.
PRICE:   Call for current pricing 1-800-922-2969
Contact Us
An Easy to Use Product at a Practical Price!


This Tester Allows You to Conduct:
• Continuity
• Earth Bonding
• Polarity
• Short Circuit
• Dielectric Strength 
The tester insures your compliance with the requirements normally specified by
UL, CSA, VDE, TUV, BSI and JIS. Test details should be verified to your specific requirements.
Multiple Test Receptacles
A combination of any three receptacles or connectors can be installed on the front panel. Each is mounted on a removable plate secured with quarter turn fasteners and internal connectors for easy replacement.
Automatic Operation
The test cords are cycled through the test sequence. Successful completion is signaled by a PASS ALL indicator. Failure of any condition shuts off all voltages and causes the test sequence to stop. A Buzzer and FAIL lamp signals the operator. The problem must be cleared and the RESET button pressed to continue.
Easy Calibration
Calibration controls are located on the rear panel.
Built, Sold and Serviced in the U.S.
For over four decades Sotcher Measurement, Inc. has provided latest state-of-the-art electrical test equipment that is easy to use and maintain. Our customers rely on our products to verify the safety of the electrical devices they rent, use or manufacture. We feel this commitment very deeply. In response, we do our utmost to insure that the products we offer are of the highest quality and performance, consistent with good value.
We continue to design, manufacture and service all of our products in the United States. We are proud to be able to offer our customers fine American products that are easy to use at a practical price.
Input Voltage:
120Volts, 50-70Hz, single phase
Continuity Test Current:   
Conductors: 1.5 amps at 6 VAC, rejecting resistances of 0.5 Ohms or greater
Gnd Wire: 25 amps at 6 VAC,  rejecting resistance of 0.1 Ohms or greater
Test Duration: 0.04 seconds
Dielectric Strength:
Performed in accordance with UL and CSA specifications. 0-2,000 VAC applied at zero crossing point. Rejects fault currents or flashover. Fault current rejection range adjustable over range of 1 to 10 Milliamps
Test Duration: 1 second 
Model 461 Power Cord Test Station
• User's Manual
• One Year Parts and Labor Warranty



"Definitely a good, top of the line product. Nobody questions the battery after it has been tested with the ni-cad battery tester. Can't beat the 573 when it comes to checking ni-cad batteries." 

Peter Reis
Fit-it Shop



Nationally Recognized Sotcher Measurement Inc. test equipment is in common use throughout the United States by major manufactures of power tools and appliances.